Axminster ZX Series Power Feed A very useful power feed system for the X axis to provide a smooth, variable speed drive to the traverse of the table. This will enable control of the cut finish to a much ...

£279.96*

Shipping: £0.00

» More

Axminster SIEG C0 Woodturning Tool Res An adjustable 150mm tool rest for the use of woodturning chisels. Supplied with a 4 prong drive centre for wood. ...

£36.96*

Shipping: £2.95

» More

Axminster Evolution Series S Shaped Tool Res This 19mm diameter highly polished round steel bar has an S-curve shape. The shape makes it ideally suitable for turning bowls. The rest's curvature allows you to get ...

£24.96*

Shipping: £2.95

» More

Axminster SIEG SC2, C3 Rocker Tool Pos The Rocker Tool Post is designed to eliminate the need for shimming, particularly of older lathe tools that have been sharpened many times. The height of the cutting edge ...

£18.96*

Shipping: £2.95

» More

Axminster 300mm Tool Rest 25mm Stem A 300mm tool rest, for use with the Axminster AWVSL900 or Perform CCL and the Perform CCBL woodturning lathes. Stem size 25mm. ...

£20.88*

Shipping: £2.95

» More

Axminster Engineer Series SC8 Quick Change Tool Pos A quick change tool post with 3 tool holders for the SC8 lathe. Easy to use and adjusts to the correct tool tip height without messing around with shims or spacers under ...

£103.93*

Shipping: £0.00

» More

Axminster Trade Floor Stand for AT330T/AT330ST This stand is designed for use with the Axminster Trade AT330T and AT330ST thicknessers, but would be suitable as a stand for many other small machines. Made from sheet ...

£59.95*

Shipping: £0.00

» More

Axminster Trade Stand for AT350WL/AT1416VS Lathe Specifically designed for the AT350WL woodturning lathe, this sturdy stand makes a very useful addition to these popular lathes. ...

£239.95*

Shipping: £0.00

» More

Axminster SIEG SC2 Faceplate A 160mm diameter face plate for the Axminster SIEG SC2 lathe. The chuck guard and mounting arm need to be removed to allow the use of the faceplate. ...

£27.48*

Shipping: £2.95

» More

Axminster Rider Honing Guide The Axminster Rider honing guide is very similar in design to the classic Eclipse 36. It is an ideal tool for achieving a consistent bevel angle, everytime you sharpen a ...

£10.96*

Shipping: £2.95

» More

Axminster SIEG C0 Faceplate A 60mm faceplate to replace the chuck allowing irregular shaped items to be fitted. Three slots allow clamps to be used to secure the item. ...

£11.46*

Shipping: £2.95

» More

Axminster Trade Floor Stand for ST-480 Drum Sander This is the optional floor stand for the ST-480 Drum Sander. Manufactured from welded steel and incorporating a large cupboard for storage, it allows the sander to be ...

£379.00*

Shipping: £0.00

» More

Axminster SIEG SC4 Faceplate Faceplate for the Axminster SIEG SC4 Lathe. 7" diameter. Very useful when trying to hold irregular shaped objects. An additional clamp kit is available to hold the ...

£31.48*

Shipping: £2.95

» More

Axminster Trade Stand for AT406WL/AT1628VS Lathe Designed to fit the AT406WL woodturning lathe, this robust cast iron stand makes a very useful addition to this popular lathe. Some useful webs are included in the casting ...

£329.95*

Shipping: £0.00

» More

Axminster Trade HEPA Filter for AT155CE/T-2000CK This optional HEPA cartridge filter's for the AT155CE 1hp Cyclone Extractor gives a 0.3 micron filtering performance. This filter is best suited for use when the ...

£169.96*

Shipping: £0.00

» More

Axminster Rider Corner Chisel The corner chisel is a modern derivative of a wheelwright's Bruzz chisel. The Bruzz chisel did the job of the final cleaning and trimming of the mortices in the ...

£28.99*

Shipping: £2.95

» More

Axminster Trade HEPA Filter for AT155CE/T-2000CK This optional HEPA cartridge filter for the AT155CE 2hp Cyclone gives a 0.3 micron filtering performance. This filter is best suited for use when the machine is being ...

£249.96*

Shipping: £0.00

» More

Axminster Abrasive Strip Ki Four 6m rolls of 25mm wide 'J' weight cloth backed abrasive, all stored in one handy dispenser. Wonderfully useful for all manner of small general sanding jobs and ...

£11.99*

Shipping: £2.95

» More

Axminster Trade Bed Extension for AT350WL/AT1416VS A very worthwhile addition to the AT350WL lathes, this 600mm bed extension will increase the capacity to a full 1m between centres. With heavy cast iron construction for ...

£229.96*

Shipping: £0.00

» More

Axminster Air 9040L Air Stapler This heavy duty model uses narrow crown 18 gauge staples 5.8mm wide in lengths from 16mm to 38mm long. Very good for applications such as stapling hardboard panels, thin ...

£65.95*

Shipping: £0.00

» More

Axminster Evolution Series Probe with Carbide Axminster Evolution Series probes have 12.7mm (1/2") diameter shanks, designed to fit into the Axminster Evolution Series woodturning handle. Axminster Evolution Series ...

£36.96*

Shipping: £2.95

» More

Axminster SIEG C1 Tailstock Chuck A 10mm capacity chuck fitted with a No. 1MT arbor which just slots into the tailstock to give a secure and accurate location for drilling and similar operations. ...

£25.90*

Shipping: £2.95

» More

Axminster SIEG SX4 Floor Stand A robust fabricated steel floor stand for the Axminster SIEG SX4 Mill Drill. Fitted with floor bolt down lugs and a large storage cupboard. Probably a must have for this ...

£394.96*

Shipping: £0.00

» More

Axminster SIEG C0 Tailstock Chuck A 8mm tailstock chuck with a special fitment for the C0 tailstock barrel. Allows small drill bits or milling cutters to be used. ...

£22.96*

Shipping: £2.95

» More

Axminster Hobby Series Bed Extension for AH-1218 & This extension bed is designed to suit the AH-1218 and AH-1218VS bench top hobby woodturning lathes, increasing the capacity to a very useful 1,130mm between centres. It is ...

£74.95*

Shipping: £0.00

» More

Axminster Rider Round RASP - 150mm For any woodworking or furniture making that involves shaping curved or carved surfaces, a quality rasp is invaluable. When it comes to shaping concave surfaces or ...

£13.99*

Shipping: £2.95

» More

Axminster Heavy Duty Air Duster A nicely made cast alloy air duster. Chrome plated body with brass valve and nozzle to ensure a long life. Convenient hanging hook. Comfortable and durable in use. Has a ...

£14.95*

Shipping: £2.95

» More

Axminster Faceplate 50mm 50mm diameter faceplate is CNC-produced for maximum accuracy and perfect balance. The timber mounting holes are fully countersunk on the rear face and lightly countersunk ...

£11.45*

Shipping: £2.95

» More

Axminster SIEG C1 Vertical Slide This accessory fits onto the saddle in place of the tool post and provides a means of holding small components whilst being milled with a suitable cutter mounted in the ...

£144.96*

Shipping: £0.00

» More

Axminster SIEG SC2 Vertical Slide Vertical slide for use on the Axminster SIEG SC2 Mini Lathe. This will allow simple milling tasks to be carried out on the lathe. Work can be held onto the slide using the ...

£187.96*

Shipping: £0.00

» More

Axminster Indexing Ring Made to our usual high standards, this accessory is designed to fit to the back of the Axminster Woodturner's and Clubman 100mm chucks only. Using the machined shoulder ...

£24.95*

Shipping: £2.95

» More

* Prices include VAT and are possibly subject to shipping costs. Offer information is provided by the corresponding merchant. Prices and/or shipping costs may have risen since last update.